The ORION LZR open laser was developed primarily for precise welding work on large pieces. The mould & die and plastic injection industries can save thousands of pounds by repairing their pieces instead of replacing them.
The Orion open laser allows for those type of laser welding repairs. From it’s generator to the fiber optic output, the Orion open makes fast work of shaping and adding metal to worn or damaged areas on pieces as large as 1000 x 1000mm.
Mounted on an articulating arm, the Orion open laser can easily move to a position needed to make the repairs thanks to it's "zero weight" head. The power range is impressive as it is adjustable from 0.1 to 200 joules.
Pulse-shape settings allow you to configure your pulse to take advantage of specific metallurgic characteristics. Superior, high-efficiency components run cooler, reducing stress on critical-wear parts, for notably longer service life and greatly reduced maintenance.
The LZR models ensure close, repeatable control over laser parameters to deliver precise results. High-efficiency fiber optics enable a higher average power output from fewer joules. User-friendly touch-screen control. Advanced constant-voltage inverter power supply eliminates power spikes to allow the laser welder to be more effective and drastically extend the flashlamp life.
The power supply has wheels on the base to allow free movement of the unit when working on larger projects. The swing arm has three bolt holes, so that you can drill into a table top or a bench top, and mount the arm. This can also be mounted on a rolling station, so that you can move this welder around.
- Touch colour display
- One hundred programmable memories
- Leica 10x stereo microscope
- Powerful integrated cooling system
- Joystick on board
- Arm extension 1200 mm
- Self-sustained manual movement
- Double laser resonator
- LED lighting with cold and white light
- 24 months warranty
- Repair of large moulds (up to 1000 x 1000 mm)
- Reposition of steel rods directly on the damaged edges
- Welding of elements with the use of filler materials, without the need for further cleaning
- Repair manufacturing errors, or design of the moulds
- Repair of melting defects such as porosity, or fractures
LASER SOURCE AND WAVE LENGTH Nd: YAG 1064 nm X2
AVERAGE POWER: 150 W
PEAK POWER: 15 kW
ENERGY: 0.1 to 200 J
IMPULSE TIME: 0.1 to 20 ms
PULSE FREQUENCY: 0.5 to 30 Hz
SPOT DIAMETER: 0.6 to 2.0 mm
SPOT SETTING: Motorized, 15 positions
WAVE PROGRAMS: Pulse Shaping 6 preset
MEMORIES CELL STORED: 100
CONTROL JOYSTICK: On Board
EXTERNAL CONTROL: Colour Touch Screen
INPUT POWER: 230 V AC, 50/60 Hz, single phase
AMP: 20 A.
MAX DIMENSIONS: [WXDXH] 50x50x80 cm
MAX EXTENSION MANUAL ARM: 1200 mm
WEIGHT: 150 kg
TYPE: Floor standing
ARGON / AIR NOZZLE: Yes / Yes
PLEASE NOTE:- THIS PRODUCT IS MADE TO ORDER AND CARRIES A 4-6 WEEK MANUFACTURING TIME
Quantity per unit:
Rate this product: